30 May 2016 Optical fiber sensor for low dose gamma irradiation monitoring
Author Affiliations +
Proceedings Volume 9916, Sixth European Workshop on Optical Fibre Sensors; 99160D (2016) https://doi.org/10.1117/12.2236860
Event: Sixth European Workshop on Optical Fibre Sensors (EWOFS'2016), 2016, Limerick, Ireland
Abstract
An optical fiber gamma ray detector is presented in this work. It is based on a Terbium doped Gadolinium Oxysulfide (Gd2O2S:Tb) scintillating powder which cover a chemically etched polymer fiber tip. This etching improves the fluorescence gathering by the optical fiber. The final diameter has been selected to fulfill the trade-off between light gathering and mechanical strength. Powder has been encapsulated inside a microtube where the fiber tip is immersed. The sensor has been irradiated with different air Kerma doses up to 2 Gy/h with a 137Cs source, and the spectral distribution of the fluorescence intensity has been recorded in a commercial grade CCD spectrometer. The obtained signal-to-noise ratio is good enough even for low doses, which has allowed to reduce the integration time in the spectrometer. The presented results show the feasibility for using low cost equipment to detect/measure ionizing radiation as gamma rays are.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ana I. de Andrés, Óscar Esteban, Miguel Embid, "Optical fiber sensor for low dose gamma irradiation monitoring", Proc. SPIE 9916, Sixth European Workshop on Optical Fibre Sensors, 99160D (30 May 2016); doi: 10.1117/12.2236860; https://doi.org/10.1117/12.2236860
PROCEEDINGS
4 PAGES


SHARE
Back to Top