Translator Disclaimer
30 May 2016 Optical fibre luminescence sensor for real-time LDR brachytherapy dosimetry
Author Affiliations +
Proceedings Volume 9916, Sixth European Workshop on Optical Fibre Sensors; 99160T (2016)
Event: Sixth European Workshop on Optical Fibre Sensors (EWOFS'2016), 2016, Limerick, Ireland
An optical fibre sensor for monitoring low dose radiation is presented. The sensor is based on a scintillation material embedded within the optical fibre core, which emits visible light when exposed to low level ionising radiation. The incident level of ionising radiation can be determined by analysing the optical emission. An optical fibre sensor is presented, based on radioluminescence whereby radiation sensitive scintillation material, terbium doped gadolinium oxysulphide (Gd2O2S:Tb), is embedded in a cavity of 250μm of a 500μm plastic optical fibre. The sensor is designed for in-vivo monitoring of the radiation dose during radio-active seed implantation for brachytherapy, in prostate cancer treatment, providing oncologists with real-time information of the radiation dose to the target area and/or nearby critical structures. The radiation from the brachytherapy seeds causes emission of visible light from the scintillation material through the process of radioluminescence, which penetrates the fibre, propagating along the optical fibre for remote detection using a multi-pixel photon counter. The sensor demonstrates a high sensitivity to Iodine-125, the radioactive source most commonly used in brachytherapy for treating prostate cancer.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. Woulfe, F. J. Sullivan, and S. O'Keeffe "Optical fibre luminescence sensor for real-time LDR brachytherapy dosimetry", Proc. SPIE 9916, Sixth European Workshop on Optical Fibre Sensors, 99160T (30 May 2016);

Back to Top