30 May 2016 Reaching millikelvin resolution in Raman distributed temperature sensing using image processing
Author Affiliations +
Proceedings Volume 9916, Sixth European Workshop on Optical Fibre Sensors; 99162A (2016) https://doi.org/10.1117/12.2236934
Event: Sixth European Workshop on Optical Fibre Sensors (EWOFS'2016), 2016, Limerick, Ireland
Abstract
Image processing is proposed and experimentally demonstrated to improve the capabilities of Raman distributed optical fibre sensors. The here reported technique consists in stacking consecutive one-dimensional Raman Stokes and anti-Stokes traces in two-dimensional data arrays (one for each Raman component), which are then processed by an image denoising algorithm. Owing to the high level of correlation between consecutive measurements in conventional Raman sensing, it is experimentally demonstrated that this newly-proposed two-dimensional denoising approach provides a significant signal-to-noise ratio improvement, which in this case reaches 13.6 dB with no hardware modification to the conventional set-up. Experimental results demonstrate Raman distributed sensing with a remarkably enhanced temperature resolution of 4 mK at 9 km distance, which is obtained with 2 m spatial resolution and a short acquisition time of 35 s.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marcelo A. Soto, Jaime A. Ramírez, Luc Thévenaz, "Reaching millikelvin resolution in Raman distributed temperature sensing using image processing", Proc. SPIE 9916, Sixth European Workshop on Optical Fibre Sensors, 99162A (30 May 2016); doi: 10.1117/12.2236934; https://doi.org/10.1117/12.2236934
PROCEEDINGS
4 PAGES


SHARE
Back to Top