Analysis Of Backscatter Measurement Systems For Characterizing Spooled Optical Fiber

Eugene Edwards; Paul B. Ruffin

doi:10.1117/12.960052

26 April 1989 Analysis Of Backscatter Measurement Systems For Characterizing Spooled Optical Fiber

Eugene Edwards, Paul B. Ruffin

Proceedings Volume 0992, Fiber Optics Reliability: Benign and Adverse Environments II; (1989) https://doi.org/10.1117/12.960052
Event: O-E/Fiber LASE '88, 1988, Boston, MA, United States

Abstract

A novel technique for analyzing commercially available Optical Time Domain Reflectometers (OTDRs) , to be used in fiber diagnostic and characterization tests, is described. Three OTDR models are selected for evaluation. A series of optical fiber loss and length measurements are made on several single mode fibers to evaluate the performance capability of each of the selected OTDRs. The OTDR properties examined are pulse recovery following a Fresnel reflection, measurement accuracy, and distance accuracy/fault detection capability. The measurements are accomplished both manually and automatically under ambient and low temperature conditions. Pulse recovery immediately following a Fresnel reflection is given primary attention in this paper. A novel measurement technique is adopted for the collection of discrete optical loss data in the region immediately following the Fresnel reflections. An exponential-type curve is assumed for the drop off of the Fresnel reflections. It is found that bases much greater than e (2.72) gives the best fit to the optical loss data. The minimum distance beyond the Fresnel reflection zone at which the backscattered signal is obscured or distorted is determined from the data and model comparison. The minimum extent of the Fresnel reflection zone ranges from 180m to 600m depending the OTDR type and operating mode. Results of preliminary analysis of the measurement accuracy and distance accuracy/fault location capability for each OTDR are also given in this paper.

Citation Download Citation

Eugene Edwards and Paul B. Ruffin "Analysis Of Backscatter Measurement Systems For Characterizing Spooled Optical Fiber", Proc. SPIE 0992, Fiber Optics Reliability: Benign and Adverse Environments II, (26 April 1989); https://doi.org/10.1117/12.960052

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Signal attenuation

Connectors

Distance measurement

Backscatter

Standards development

Fiber optics

Fiber optics tests

Show All Keywords

Keywords/Phrases

Search In:

Publication Years