UV-visible transmission through nanohole arrays in aluminum and magnesium

Jieying Mao; Yunshan Wang; Kanagasundar Appusamy; Sivaraman Guruswamy; Steve Blair

doi:10.1117/12.2237970

17 September 2016 UV-visible transmission through nanohole arrays in aluminum and magnesium

Jieying Mao, Yunshan Wang, Kanagasundar Appusamy, Sivaraman Guruswamy, Steve Blair

Author Affiliations +

Proceedings Volume 9921, Plasmonics: Design, Materials, Fabrication, Characterization, and Applications XIV; 99212Z (2016) https://doi.org/10.1117/12.2237970
Event: SPIE Nanoscience + Engineering, 2016, San Diego, California, United States

Abstract

Extraordinary optical transmission (EOT) is a classic phenomenon in plasmonics. The study of plasmonic nanostructures in the ultraviolet (UV) is a relatively uncharted field due to challenges in both engineering (nanostructure design, optimization, and fabrication) and materials science (detailed composition analysis). Our previous research has been mainly focused on UV field enhancement ofdifferent Al nanostructures. In this work, two-dimensional periodic nanohole arrays in Aluminium (Al) and Magnesium (Mg) films were fabricated using Ga focused ion beam (FIB) lithography. Optical transmission through the arrays was obtained in the UV and visible range, with varying array periodicity. Transmission results showed strong resonance enhancement in the UV and visible region resulting from SPP coupling, with corresponding red-shift as the period increases, while waveguide mode peaks remain in place. Comparing Al and Mg EOT results, Al hole-array enabled larger transmission than that of Mg. Dips in transmission through Al arrays occur at similar spectral positions to those of Mg arrays with same periods. Numerical analysis was carried out through finite-difference-time-domain (FDTD) method, which showed far-field transmission consistent with experiments in general. The model was constructed based on transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS) of cross-sectioned samples. The effect of Gallium (Ga) implantation from FIB fabrication was qualitatively studied, which indicated Ga implants inside the hole bottom as well as higher implantation within Mg than that within Al. The model also takes into account sidewall geometry and undercut into the substrate.

Citation Download Citation

Jieying Mao, Yunshan Wang, Kanagasundar Appusamy, Sivaraman Guruswamy, and Steve Blair "UV-visible transmission through nanohole arrays in aluminum and magnesium", Proc. SPIE 9921, Plasmonics: Design, Materials, Fabrication, Characterization, and Applications XIV, 99212Z (17 September 2016); https://doi.org/10.1117/12.2237970

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE