Combination process of diamond machining and roll-to-roll UV-replication for thin film micro- and nanostructures

J. Väyrynen; K. Mönkkönen; S. Siitonen

doi:10.1117/12.2237739

27 September 2016 Combination process of diamond machining and roll-to-roll UV-replication for thin film micro- and nanostructures

J. Väyrynen, K. Mönkkönen, S. Siitonen

Author Affiliations +

Proceedings Volume 9949, Polymer Optics and Molded Glass Optics: Design, Fabrication, and Materials 2016; 99490J (2016) https://doi.org/10.1117/12.2237739
Event: SPIE Optical Engineering + Applications, 2016, San Diego, California, United States

Abstract

Roll-to-roll (R2R) ultraviolet (UV) curable embossing replication process is a highly accurate and cost effective way to replicate large quantities of thin film polymer parts. These structures can be used for microfluidics, LED-optics, light guides, displays, cameras, diffusers, decorative, laser sensing and measuring devices. In the R2R UV-process, plastic thin film coated with UV-curable lacquer, passes through an imprinting embossing drum and is then hardened by an UV-lamp. One key element for mastering this process is the ability to manufacture a rotating drum containing micro- and nanostructures. Depending on the pattern shapes, the drum can be directly machined by diamond machining or it can be done through wafer level lithographical process. Due to the shrinkage of UV-curable lacquer, the R2R drum pattern process needs to be prototyped few times, in order to get the desired performance and shape from the R2R produced part. To speed up the prototyping and overall process we have developed a combination process where planar diamond machining patterns are being turned into a drum roller. Initially diamond machined patterns from a planar surface are replicated on a polymer sheet using UV-replication. Secondly, a nickel stamper shim is grown form the polymer sheet and at the end the stamper is turned into a roller and used in the R2R process. This process allows various micro milled, turned, grooved and ruled structures to be made at thin film products through the R2R process. In this paper, the process flow and examples of fabricating R2R embossed UVcurable thin film micro- and nanostructures from planar diamond machined patterns, is reported.

Conference Presentation

Citation Download Citation

J. Väyrynen, K. Mönkkönen, and S. Siitonen "Combination process of diamond machining and roll-to-roll UV-replication for thin film micro- and nanostructures", Proc. SPIE 9949, Polymer Optics and Molded Glass Optics: Design, Fabrication, and Materials 2016, 99490J (27 September 2016); https://doi.org/10.1117/12.2237739

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available