Translator Disclaimer
8 September 2016 Slumped glass foils as substrate for adjustable x-ray optics
Author Affiliations +
Thin glass modular mirrors are a viable solution to build future X-ray telescopes with high angular resolution and large collecting area. In our laboratories, we shape thin glass foils by hot slumping and we apply pressure to assist the replication of a cylindrical mould figure; this technology is coupled with an integration process able to damp low frequency errors and produces optics in the Wolter I configuration, typical for the X-ray telescopes. From the point of view of the hot slumping process, the efforts were focused in reducing low-, mid- and high- frequency errors of the formed Eagle glass foils. Some of our slumped glass foils were used for the development of active X-ray optics, where piezoelectric actuators are used to correct the slumped glass foil deviations from the ideal shape. In particular, they were used for the Adjustable X-raY optics for astrOnoMy project (AXYOM) developed in Italy, and the X-ray Surveyor mission, as developed at the Smithsonian Astrophysical Observatory / Center for Astrophysics (SAO/CfA) in USA. In this paper we describe the optimisation of the hot slumping process, comparing the results with the requirements of the considered active optics projects. Finally, since the present configuration of the Pennsylvania State University (PSU) coating equipment is limited to 100 x 100 mm2, the slumped glass foils used for the SAO project were cut from 200 x 200 mm2 to 100 x 100 mm2, and a low-frequency change was observed. A characterisation of the profile change upon cutting is presented.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bianca Salmaso, Stefano Basso, Marta Civitani, Mauro Ghigo, Joanna Hołyszko, Carlo Pelliciari, Daniele Spiga, Gabriele Vecchi, and Giovanni Pareschi "Slumped glass foils as substrate for adjustable x-ray optics", Proc. SPIE 9965, Adaptive X-Ray Optics IV, 99650B (8 September 2016);


Shaping Si, NiCo, and glass substrates via stresses in the...
Proceedings of SPIE (September 08 2016)
Technology challenges of active x-ray optics for astronomy
Proceedings of SPIE (September 01 2010)
Toward active x-ray telescopes
Proceedings of SPIE (October 11 2011)
Active x-ray mirror development at UCL: preliminary results
Proceedings of SPIE (November 20 2007)
Active x ray optics for Generation X the next...
Proceedings of SPIE (June 14 2006)

Back to Top