Access to eBooks is limited to institutions that have purchased or currently subscribe to the SPIE eBooks program. eBooks are not available via an individual subscription. SPIE books (print and digital) may be purchased individually on SPIE.Org.

Contact your librarian to recommend SPIE eBooks for your organization.
Ebook Topic:
Back Matter
Abstract
This section contains the bibliography, index, and author biographies.

Bibliography

1 

AdamJ.-L.ZhangX., Eds., Chalcogenide Glasses: Preparation, Properties and Applications, Woodhead Publishing, Cambridge, UK (2014).Google Scholar

2 

ASME Y14.5-2009, Dimensioning and Tolerancing, American Society of Mechanical Engineers, New York (2009).Google Scholar

3 

BansalN. P.DoremusR. H., Handbook of Glass Properties, Academic Press, Orlando (1986).Google Scholar

4 

BaumerS., Handbook of Plastic Optics, Wiley-VCH, Weinheim (2005).Google Scholar

5 

BrauneckerB.HentschelR.TizianiH. J., Advanced Optics Using Aspherical Elements, SPIE Press, Bellingham, Washington (2008) [doi: 10.1117/3.741689].Google Scholar

6 

BrinksmeierE.RiemerO.GläbeR., Fabrication of Complex Optical Components, Springer, New York (2013).Google Scholar

7 

FosterL. W., Geo-Metrics III: The Application of Geometric Dimensioning and Tolerancing Techniques, Addison Wesley, Reading (1994).Google Scholar

8 

HartmannP., Optical Glass, SPIE Press, Bellingham, Washington (2014) [doi: 10.1117/3.1002595].Google Scholar

9 

HiltonA. R., Chalcogenide Glasses for Infrared Optics, McGraw Hill, New York (2010).Google Scholar

10 

ISO 10110, Optics and Optical Instruments – preparation of drawings for optical elements and systems – part 1-12, International Organization for Standardization, Geneva (2010).Google Scholar

11 

ISO 1101:2013, Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out, International Organization for Standardization, Geneva (2013).Google Scholar

12 

KimmelK.ParksR. E., ISO 10110 Optics and Optical Instruments – A User’s Guide, 2nd Edition, OSA, Washington, D.C. (2002).Google Scholar

13 

MIL-PRF-13830B, Performance Specification – Optical Components for Fire Control Instruments; General Specification governing the manufacture, assembly and inspection of, U.S Army Armament Research, Development and Engineering Center (ARDEC) (1997).Google Scholar

14 

REACH, Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), Regulation (EC) No. 1907/2006, European Chemicals Agency (2006).Google Scholar

15 

RoHS Directive, Restriction of Hazardous Substances Directive, 2002/95/EC, European Union (2002).Google Scholar

16 

RoHS 2 Directive, Restriction of Hazardous Substances Directive, 2011/65/EU, European Union (2011).Google Scholar

17 

SchaubM. P., The Design of Plastic Optical Systems, SPIE Press, Bellingham, Washington (2009) [doi: 10.1117/3.796330].Google Scholar

18 

SchaubM. P.SchwiegerlingJ.FestE. C.SymmonsA.ShepardR. H., Molded Optics: Design and Manufacture, CRC Press, Taylor and Francis Group, London (2011).Google Scholar

19 

SchererG. W., Relaxation in Glass and Composites, Wiley-Interscience, New York (1986).Google Scholar

20 

SchwiegerlingJ., Optical Specification, Fabrication, and Testing, SPIE Press, Bellingham, Washington (2015) [doi: 10.1117/3.796330].Google Scholar

21 

ShelbyJ. E., Introduction to Glass Science and Technology, 2nd Edition, The Royal Society of Chemistry, London (2005).Google Scholar

22 

TkaczykT., “Miniature Optics for Diode Lasers and Beam Shaping,” SPIE Short Course, SC012, Bellingham, Washington (2013).Google Scholar

23 

U.S. Precision Lens, The Handbook of Plastic Optics, 2nd Edition, U.S. Precision Lens, Cincinnati (1983).Google Scholar

24 

WhitehouseD., Surfaces and Their Measurement, Kogan Page Science, Taylor Hobson Ltd., London, Sterling, Virginia (2002).Google Scholar

bio1.jpgAlan Symmons is the Executive Vice President of Operations at LightPath Technologies, a worldwide leader in precision glass molding (NASDAQ: LPTH). He previously held the titles of Vice President of Corporate Engineering and Director of Engineering. Prior to joining LightPath in 2006, he was Engineering Manager at Aurora Optical, a cellphone camera module manufacturer, and held various engineering positions in injection-molded plastic optics at both Applied Image Group – Optics and Donnelly Optics.

Alan has 20 years of experience in molded optics with over a dozen published papers in the field. He is a Senior Member of SPIE and OSA, a member of ASPE, and is active in the Florida Photonics Cluster. Alan has a B.S. in mechanical engineering from Rensselaer Polytechnic Institute and an MBA from the Eller School of Management at the University of Arizona.

bio2.jpgMichael Schaub is a Senior Principal Optical Engineer at Raytheon Missile Systems. In addition, he is the founder of Schaub Optical LLC, an optical design and engineering consulting firm. Prior to joining Raytheon, he worked at Donnelly Optics, where he designed and developed multiple high-volume plastic optic designs.

Mike has over 20 years of experience in plastic optics, with two books and several papers published. He is a member of SPIE and OSA. He has a B.S. in optics from the Institute of Optics at the University of Rochester, an M.Sc. in engineering science from the University of Oxford, and an M.S. and Ph.D. in optical sciences from the Optical Sciences Center at the University of Arizona.

TOPIC
10 PAGES

SHARE
Back to Top