Access to eBooks is limited to institutions that have purchased or currently subscribe to the SPIE eBooks program. eBooks are not available via an individual subscription. SPIE books (print and digital) may be purchased individually on SPIE.Org.

Contact your librarian to recommend SPIE eBooks for your organization.
Ebook Topic:
Back Matter
Abstract
This section includes the references, the bibliography, the index, and the author's bio.

References

1 

Nelson J. D., Youngworth R. N., and Aikens D. M., “The cost of tolerancing,” Proc. SPIE 7433, 74330E (2009) [doi: 10.1117/12.828433]. Google Scholar

2 

Smith W. J., Modern Optical Engineering, 2nd ed., McGraw-Hill, New York, p. 476 (1990). Google Scholar

3 

Willey R. R., Durham M. E., “Maximizing production yield and performance in optical instruments through effective design and tolerancing,” CR43, Optomechanical Design, SPIE Press, Bellingham, WA, pp. 76–108 (1992). Google Scholar

4 

Forbes G. W., Brophy C. P., “Asphere, O asphere, how shall we describe thee?” Proc. SPIE 7100, 710002 (2008) [doi: 10.1117/12.797770]. Google Scholar

5 

Williamson R., “Inexpensive method to evaluate and optimize spot tool performance for the small optical shop,” Proc. SPIE 1531, 270–275 (1992) [doi: 10.1117/12.134868]. Google Scholar

6 

Williamson R., “Modular reconfigurable spot tool,” Proc. SPIE 1994, 27–30 (2005) [doi: 10.1117/12.167978]. Google Scholar

7 

Yoder P. J., Jr., Opto-Mechanical Systems Design, 3rd ed., CRC Press, Boca Raton, FL (2005). Google Scholar

8 

Yoder P. J., Jr., Mounting Optics in Optical Instruments, 2nd ed., SPIE Press, Bellingham, WA (2008) [doi: 10.1117/3.785236]. Google Scholar

9 

Ahmad A., Ed., Handbook of Optomechanical Engineering, CRC Press, Boca Raton, FL (1997). Google Scholar

10 

Karow H. H., Fabrication Methods for Precision Optics, John Wiley & Sons, New York, p. 295 (1993). Google Scholar

11 

Su P., Parks R. E., Wang L., Angel R. P., and Burge J. H., “Software configurable optical test system: a computerized reverse Hartmann test,” Applied Optics 49(23), 4404–4412 (2010). Google Scholar

12 

Harvey J. E., “Scattering effects in x-ray imaging systems,” Proc. SPIE 2515, 246–272 (1995) [doi: 10.1117/12.212595]. Google Scholar

13 

Harvey J. E., Thompson A. K., “Scattering effects from residual optical fabrication errors,” Proc. SPIE 2576, 155–174 (1995) [doi: 10.1117/12.215588]. Google Scholar

14 

Murphy P. E., “Methods and challenges in quantifying mid-spatial frequencies,” in Optical Fabrication and Testing, OSA Technical Digest (CD), paper 0TuAe, Optical Society of America, Washington, D.C. (2008). Google Scholar

15 

Youngworth R. N. and Stone B. D., “Effects of mid-spatial-frequency surface errors on image quality,” Applied Optics 39(13), 2198–2209 (2000). Google Scholar

TOPIC
13 PAGES

SHARE
Back to Top