Back Matter

Katie Schwertz; Jim Burge

doi:10.1117/3.934930.bm

Translator Disclaimer

Ebook Topic:
Back Matter

Book: Field Guide to Optomechanical Design and Analysis

Author(s): Katie Schwertz, Jim Burge

Published: 2012
https://doi.org/10.1117/3.934930.bm

Abstract

This section contains the bibliography, list of references, index, and author bios.

Bibliography

1

Ahmad, A., (1997). Google Scholar

2

Baiocchi, D., (2004). Google Scholar

3

Barnes, W. P., 1992). Google Scholar

4

Baumeister, T., (2007). Google Scholar

5

Bäumer, S., (2005). Google Scholar

6

Bayar, M., (1981). Google Scholar

7

Birch, K. P, ““An updated Edlen equation for the refractive index of air,”,” Metrologia 30,, 155–162 (1993). Google Scholar

8

Blanding, D. L., (1992). Google Scholar

9

Burge, J. H., (6288). Google Scholar

10

Chen, W. T, (1979). Google Scholar

11

Ciddor, P. E., (1566). Google Scholar

12

Culpepper, M. L., ““Design of quasi-kinematic couplings,”,” Precision Engineering 28,, 338–357 (2004). Google Scholar

13

Doremus, R. H., (1983). Google Scholar

14

Doyle, K. B, (2003). Google Scholar

15

Ealey, M., 1997). Google Scholar

16

Fischer, R. E., (1991). Google Scholar

17

Gibbons, R. C., ““Athermal infrared optics,”,” 1–12 Equipment Group, Texas Instruments, Inc.,1976). Google Scholar

18

Hale, L. C., (1999). Google Scholar

19

Hibbard, D. L., 1997). Google Scholar

20

Jamieson, T. H., ““Athermalization of optical instruments from the optomechanical viewpoint”,” (Critical Review Vol CR43,, (1992). Google Scholar

21

Jones, G. E., (1975). Google Scholar

22

Mehta, P. K., (1987). Google Scholar

23

(1962). Google Scholar

24

Monti, C. L., (6665). Google Scholar

25

Nelson, J. E., (1982). Google Scholar

26

(1963). Google Scholar

27

Povey, V., (1986). Google Scholar

28

(1011). Google Scholar

29

Schwertz, K., (7793). Google Scholar

30

Schwertz, K., (7793). Google Scholar

31

Sheridan, P. M., 2001). Google Scholar

32

Singh, S. P., ““Measurement and analysis of the next-day air shipping environment for mid-sized and lightweight packages for DHL, FedEx, and United Parcel Service,”,” Packing Technology and Science 19(4),, 227–235 (2006). Google Scholar

33

Singh, S. P., (2010). Google Scholar

34

Slocum, A. H., (1992). Google Scholar

35

Smith, S. T., (2000). Google Scholar

36

Smith, W. J., (2000). Google Scholar

37

Stachiw, J. D., (1978). Google Scholar

38

Stone, R., (2009). Google Scholar

39

Valente, T. M., (1990). Google Scholar

40

Valente, T. M, (1989). Google Scholar

41

Vukobratovich, D., (1988). Google Scholar

42

Weber, M. J., (2003). Google Scholar

43

Yoder, P. R., (2008). Google Scholar

44

Yoder, P. R., (1998). Google Scholar

45

Yoder, P. R., (2006). Google Scholar

46

Young, W. C., (2000). Google Scholar

References

47

Google Scholar

48

Schott - Technical Note, (2004). Google Scholar

49

Google Scholar

50

Nelson, J. E., (1982). Google Scholar

51

Park, W. H., (2010). Google Scholar

52

Valente, T. M., (1989). Google Scholar

53

Kimmel, R. K, (1995). Google Scholar

Katie Schwertz received her BS in Optics from the University of Rochester Institute of Optics in 2008 and an MS in Optical Sciences from the University of Arizona in 2010. Her graduate work focused on optomechanics, during which she completed the report Useful Estimations and Rules of Thumb for Optomechanics under the guidance of Jim Burge. She currently works as an optomechanical designer for Edmund Optics at their Tucson Design Center.

Jim Burge is a Professor of Optical Sciences and Astronomy at the University of Arizona, leading research and curriculum development in the areas of optomechanical engineering, optical-systems engineering, and optical manufacturing. Dr. Burge has a BS degree from Ohio State University in Engineering Physics with Mechanical Engineering, and MS and PhD degrees in Optical Sciences from the University of Arizona.