Access to eBooks is limited to institutions that have purchased or currently subscribe to the SPIE eBooks program. eBooks are not available via an individual subscription. SPIE books (print and digital) may be purchased individually on SPIE.Org.

Contact your librarian to recommend SPIE eBooks for your organization.
Abstract
This section contains the bibliography, list of references, index, and author bios.

Bibliography

1 

Ahmad,A., Handbook of Optomechanical Engineering, CRC Press, Boca Raton, FL (1997).Google Scholar

2 

Baiocchi,D., “Design and Control of Lightweight, Active Space Mirrors,” Ph.D. Thesis, Univ. of Arizona (2004).Google Scholar

3 

Barnes,W. P., “Optical Windows,” in Optomechanical Design, P. R. Yoder, Ed., pp. 232–253, SPIE Press, Bellingham, WA (1992).Google Scholar

4 

Baumeister,T., A. M. Sadegh, and E. A. Avallone, Marks’ Standard Handbook for Mechanical Engineers, McGraw-Hill, New York (2007).Google Scholar

5 

Bäumer,S., Handbook of Plastic Optics, pp. 7–34, Weinheim: Wiley-VCH, Berlin (2005).Google Scholar

6 

Bayar,M., “Lens barrel optomechanical design principles,” Opt. Eng. 20(2), 181–186 (1981).Google Scholar

7 

Birch,K. P., and Downs, M. J., “An updated Edlen equation for the refractive index of air,” Metrologia 30, 155–162 (1993).Google Scholar

8 

Blanding,D. L., Principles of Exact Constraint Mechanical Design, Eastman Kodak, Rochester, NY (1992).Google Scholar

9 

Burge,J. H., “An easy way to relate optical element motion to system pointing stability,” Proc. SPIE 6288, 628801 (2006) [doi:10.1117/12.677917].Google Scholar

10 

Chen,W. T., and C. W. Nelson, “Thermal stress in bonded joints,” IBM J. Res. Develop. 23(2) 179–188 (1979).Google Scholar

11 

Ciddor,P. E., “Refractive index of air: new equations for the visible and near infrared,” Appl. Optics 35, 1566–1573 (1996).Google Scholar

12 

Culpepper,M. L., “Design of quasi-kinematic couplings,” Precision Engineering 28, 338–357 (2004).Google Scholar

13 

Doremus,R. H., “Fracture statistics: A comparison of the normal, Weibull, and Type I extreme value distributions,” J. App. Phy. 54(1), 193–198 (1983).Google Scholar

14 

Doyle,K. B., and M. A. Kahan, “Design strength of optical glass,” Proc. SPIE 5176, 14–25 (2003) [doi:10.1117/12.506610].Google Scholar

15 

Ealey,M., R. Paquin, and T. Parsonage, eds., Advanced Materials for Optics and Precision Structures, SPIE Press, Bellingham, WA (1997).Google Scholar

16 

Fischer,R. E., “Optimization of lens designer to manufacturer communications,” Proc. SPIE 1354, 506–522 (1991) [doi:10.1117/12.47955].Google Scholar

17 

Gibbons,R. C., “Athermal infrared optics,” Equipment Group, Texas Instruments, Inc., 1–12 (Feb. 1976).Google Scholar

18 

Hale,L. C., “Principles and Techniques for Designing Precision Machines,” Ph.D. Thesis, MIT, LLNL (1999).Google Scholar

19 

Hibbard,D. L., “Electroless nickel for optical applications,” Chapter 9 in Advanced Materials for Optics and Precision Structures, Ealey, M., R. Paquin, and T. Parsonage, eds., SPIE Press, Bellingham, WA (1997).Google Scholar

20 

Jamieson,T. H., “Athermalization of optical instruments from the optomechanical viewpoint” (Critical Review Vol CR43, (1992).Google Scholar

21 

Jones,G. E., “High-performance lens mounting,” SPIE Proc. 73, 9–17 (1975).Google Scholar

22 

Mehta,P. K., “Flexural rigidity characteristics of light-weighted mirrors,” Proc. SPIE 748, 158–171 (1987).Google Scholar

23 

“Military standard environmental test methods for aerospace and ground equipment,” MIL-STD-810, United States Air Force, www.dtc.army.mil/publications/810June1962.pdf (1962).Google Scholar

24 

Monti,C. L., “Athermal bonded mounts: incorporating aspect ratio into a closed-form solution,” Proc. SPIE 6665, 666503 (2007) [doi:10.1117/12.730275].Google Scholar

25 

Nelson,J. E., J. Lubliner, and T. S. Mast, “Telescope mirror supports: plate deflections on point supports,” Proc. SPIE 332, 212–228 (1982).Google Scholar

26 

“Optical components for fire control instruments; general specification governing the manufacture, assembly, and inspection of,” MIL-PREF-13830B, United States Army, snebulos.mit.edu/projects/reference/MIL.../MIL-PRF-13830B.pdf (1963).Google Scholar

27 

Povey,V., “Athermalisation techniques in infrared systems,” Proc. SPIE 655, 142–153 (1986).Google Scholar

28 

“Preparation of drawings for optical elements and systems,” ISO 10110, International Organization for Standardization, www.iso.org/iso/iso_catalogue/ catalogue_tc/catalogue_detail.htm?csnumber=35991 (2006).Google Scholar

29 

Schwertz,K., “Cost and performance trade-offs for commercially available linear stages,” Proc. SPIE 7793, 77930Q (2010) [doi:10.1117/12.868245].Google Scholar

30 

Schwertz,K., and J. H. Burge, “Relating axial motion of optical elements to focal shift,” Proc. SPIE 7793, 779306 (2010) [doi:10.1117/12.868244].Google Scholar

31 

Sheridan,P. M., F. O. James, and T. S. Miller, “Design of Components,” in Engineering with Rubber: How to Design Rubber Components, Second Edition, A. N. Gent, Ed., Hanser Gardner Publications, Cincinnati, OH (2001).Google Scholar

32 

Singh,S. P., G. J. Burgess, J. Singh, and M. Kremer, “Measurement and analysis of the next-day air shipping environment for mid-sized and lightweight packages for DHL, FedEx, and United Parcel Service,” Packing Technology and Science 19(4), 227–235 (2006).Google Scholar

33 

Singh,S. P., J. Singh, K. C. Chiang, and K. Saha, “Measurement and analysis of small packages in next-day air shipments,” Packing Technology and Science 23(1), 1–9 (2010).Google Scholar

34 

Slocum,A. H., Precision Machine Design, Society of Manufacturing, Dearborn, MI (1992).Google Scholar

35 

Smith,S. T., Flexures: Elements of Elastic Mechanisms, Gordon & Breach, Amsterdam (2000).Google Scholar

36 

Smith,W. J., Modern Optical Engineering, Third Edition, McGraw-Hill, New York (2000).Google Scholar

37 

Stachiw,J. D., “Design parameters for germanium windows under uniform pressure loading,” Proc. SPIE 131, 57–72 (1978).Google Scholar

38 

Stone,R., “FEA Presentation: Common pitfalls/problems, tips, and examples,” Lecture at the Univ. of Arizona, Tucson, AZ (6 Nov 2009).Google Scholar

39 

Valente,T. M., “Scaling laws for lightweight optics,” Proc. SPIE 1340, 47–66 (1990) [doi:10.1117/12.23035].Google Scholar

40 

Valente,T. M., and D. Vukobratovich, “A comparison of the merits of open-back, symmetric sandwich, and contoured back mirrors as light-weighted optics,” Proc. SPIE 1167, 20–36 (1989).Google Scholar

41 

Vukobratovich,D., and R. Richard, “Flexure mounts for high-resolution optical elements,” Proc. SPIE 959, 18–36 (1988).Google Scholar

42 

Weber,M. J., Handbook of Optical Materials, CRC Press, Boca Raton, FL (2003).Google Scholar

43 

Yoder,P. R., Mounting Optics in Optical Instruments, Second Edition, SPIE Press, Bellingham, WA (2008) [doi:10.1117/3.785236].Google Scholar

44 

Yoder,P. R., Design and Mounting of Prisms and Mirrors in Optical Instruments, SPIE Press, Bellingham, WA (1998).Google Scholar

45 

Yoder,P. R., Opto-mechanical Systems Design, CRC Press, Boca Raton, FL (2006).Google Scholar

46 

Young,W. C., Roark’s Formulas for Stress and Strain, McGraw-Hill, New York (2000).Google Scholar

References

47 

NIST/SEMATECH, e-Handbook of Statistical Methods, www.itl.nist.gov/div898/handbook/index.htm.Google Scholar

48 

Schott- Technical Note. TIE-33: Design strength of optical glass and Zerodur (2004).Google Scholar

50 

Nelson,J. E., Lubliner, J., and Mast, T. S., “Telescope mirror supports: plate deflection on point supports,” Proc. SPIE 332 (1982).Google Scholar

51 

Park,W. H., “Parametric modeling of self-weighted distortion for plane optical mirrors,” (2010).Google Scholar

52 

Valente,T. M., Vukobratovich, D., “Comparison of the merits of open-back, symmetric sandwich, and contoured back mirrors as lightweight optics,” Proc. SPIE 1167 (1989).Google Scholar

53 

Kimmel,R. K., and Parks, R. E., ISO 10110 Optics and Optical Instruments: Preparation of Drawings for Optical Elements and Systems: A User’s Guide. Washington, DC: Optical Society of America (1995).Google Scholar

fx9-1.jpg Katie Schwertz received her BS in Optics from the University of Rochester Institute of Optics in 2008 and an MS in Optical Sciences from the University of Arizona in 2010. Her graduate work focused on optomechanics, during which she completed the report Useful Estimations and Rules of Thumb for Optomechanics under the guidance of Jim Burge. She currently works as an optomechanical designer for Edmund Optics at their Tucson Design Center.

fx9-2.jpg Jim Burge is a Professor of Optical Sciences and Astronomy at the University of Arizona, leading research and curriculum development in the areas of optomechanical engineering, optical-systems engineering, and optical manufacturing. Dr. Burge has a BS degree from Ohio State University in Engineering Physics with Mechanical Engineering, and MS and PhD degrees in Optical Sciences from the University of Arizona.

TOPIC
12 PAGES

SHARE
Back to Top