Access to eBooks is limited to institutions that have purchased or currently subscribe to the SPIE eBooks program. eBooks are not available via an individual subscription. SPIE books (print and digital) may be purchased individually on SPIE.Org.

Contact your librarian to recommend SPIE eBooks for your organization.
Chapter 2:
Basic Structure of Optical Transceivers
Abstract
The role of an optical receiver is to convert an optical signal into an electrical signal. The goal of an optical transmitter is to convert an electrical signal into a modulated optical signal. These requirements define digital transceivers as well as analog receivers and transmitters. However, they differ from each other in respect of design requirements and design considerations, irrespective of digital or analog. The digital transceivers deal with large signals, while the analog receivers handle smaller signals per channel and overall large loading due to multi tone transport. On the other hand, both topologies have common requirements that can be analyzed similarly, such as sensitivity and jitter, with minor differences. Digital transceivers, however, differ from analog with respect to interfaces, controls, status, reports, and indications due to the differences in mode of operation. As for transmission, an analog transmitter handles fewer signals per channel since the optical modulation index (OMI) is low, about 4% per channel at maximum. But it has to transmit many channels; hence, the loading is similar to that of a large signal. The modulation depth for a digital transmitter is that of a large signal, driving the laser between threshold to high conduction and high optical power. Further discussion on OMI is provided in Secs. 6.9, 8.2.4, and 21.2. Additional material about community access TV (CATV) signals, standards, and broadcast methods are provided in Chapter 3.
Online access to SPIE eBooks is limited to subscribing institutions.
CHAPTER 2
16 PAGES


SHARE
Back to Top