Access to eBooks is limited to institutions that have purchased or currently subscribe to the SPIE eBooks program. eBooks are not available via an individual subscription. SPIE books (print and digital) may be purchased individually on SPIE.Org.

Contact your librarian to recommend SPIE eBooks for your organization.
Chapter 2:
The Polymer Solar Cell
Editor(s): Frederik Christian Krebs
Author(s): Jørgensen, Mikkel; Bundgaard, Eva; de Bettignies, Rémi; Krebs, Frederik C.
Abstract
The first half of this chapter briefly describes the conceptual buildup of a polymer solar cell followed by an overview of the organic materials that have been used. The second half is devoted to a practical guide to making solar cells complete with synthesis, device fabrication, and testing. Today, most polymer solar cells are based on the bulk heterojunction concept described in 1995 by Yu et al. In this type of solar cell, the donor material (typically a polymer) is mixed with an acceptor (a soluble fullerene) in an organic solvent and then spin coated or cast on a substrate of indium-tin oxide (ITO) on glass. During evaporation of the solvent and latter treatments, a microphase separation takes place with the formation of an interpenetrating network. A hole-blocking layer of, e.g., lithium fluoride may be added, and in a last step a metal electrode (aluminum) is evaporated on top (Fig. 2.1).
Online access to SPIE eBooks is limited to subscribing institutions.
CHAPTER 2
79 PAGES


SHARE
Back to Top