Access to SPIE eBooks is limited to subscribing institutions. Access is not available as part of an individual subscription. However, books can be purchased on SPIE.Org
Chapter 13:
Connectors and Splices
Author(s): Jeff Hecht
Published: 2015
DOI: 10.1117/3.1445658.ch13
Connectors and splices link the ends of two fibers both optically and mechanically. The two are not interchangeable. A connector is mounted on the end of a cable or optical device so it can be attached to other cables or devices. Like electrical connectors, fiberoptic connectors can be plugged and unplugged. In contrast, splices are permanent junctions between a pair of fiber ends. The cables attached to your television and stereo have connectors on the end so they can be plugged into other components. Splices are the optical equivalent of permanent solder joints. This chapter starts by explaining their applications and their common operating principles, then describes connector properties and types, and splicing. Chapter 14 will cover couplers, which in fiber optics are quite different from connectors and splices.
Online access to SPIE eBooks is limited to subscribing institutions.

Back to Top