Access to SPIE eBooks is limited to subscribing institutions. Access is not available as part of an individual subscription. However, books can be purchased on SPIE.Org
Abstract
When measuring small distances on the order of millimeters with submillimeter resolution, one typically uses a so-called linear voltage differential transformer (LVDT), which is an electromechanical device with three solenoid coils placed in series around a hollow core. The center coil is the primary, and the two outer coils are the secondaries. A cylindrical ferromagnetic core, attached to the measuring rod, slides inside the tube. An alternating voltage drives the primary and causes a voltage signal induced in each secondary proportional to the core displacement. The AC-output induced voltages contain, after demodulation, the information of the distance displaced by the measuring rod. The LVDT range varies from a few millimeters up to 200 mm, with resolutions that can reach 1 mm. The demodulation process is a simple electronic system that produces in its output a linear voltage or digital signal proportional to the displacement of the measuring rod. Although very precise, simple to use, and relatively cheap, the LVDT has the disadvantage of needing a nearby electronic box for each unit that connects to the transducer by a multi-conductor cable. For a multi-transducer system, each unit needs its own electronic box, and each box has to be connected to the control system.
Online access to SPIE eBooks is limited to subscribing institutions.
CHAPTER 13
13 PAGES


SHARE
Back to Top