Access to SPIE eBooks is limited to subscribing institutions. Access is not available as part of an individual subscription. However, books can be purchased on SPIE.Org
Chapter 3:
Optomechanical Displacement Analysis Methods
Published: 2002
DOI: 10.1117/3.460595.ch3
This chapter presents guidelines relevant to finite element model construction and analysis methods for predicting the motion and deformation of optics and optical structures. A key idea to be conveyed is that an analyst's choice of how to model optical components is dependent on several factors. The most obvious factor, of course, is that the mechanical behavior of the hardware will require that certain modeling features and methods be used in order to accurately predict a system's true behavior. However, consideration of this factor alone would lead us to construct finite element models that capture the stress states of every fillet and stress riser in the system. This approach is certainly not practical when schedule and cost constraints are prohibitive of such an effort. Fortunately, predicting most optomechanical performance metrics do not require models capable of such extensive mechanical representation. Often, only first-order mechanical behavior is needed to provide sufficient accuracy in the prediction of optical performance. Yet another important factor in the choice of a modeling method is how the analysis results will be used. For example, if the goal of an analysis is to compare several design concepts in the early phases of a feasibility study, then simple models, which may not accurately predict the absolute behavior, may nevertheless be effective in providing relative performance predictions among the various design concepts. By presenting an array of modeling methods each with their own limitations and strengths, it is hoped that the reader becomes better able to make the best modeling decisions to meet the technical, schedule, and cost requirements of any optomechanical displacement analysis task. 3.1 Displacement Models of Optics 3.1.1 Definitions In discussing the displacement models of optics, it is helpful to define a few terms relevant to optic motion and deformation. These definitions aid future discussions of the limitations of the various modeling methods. Component rigid-body motion is the set of average translations and rotations of the optical component. This quantity can also be thought of as the motion of the center of mass of the optical component as illustrated in Fig. 3.1. Optical surface rigid-body motion is the set of average translations and rotations of the optical surface of an optical component. Figure 3.1 illustrates that this motion may be different from the component rigid-body motion.
Online access to SPIE eBooks is limited to subscribing institutions.

Back to Top