Critical dimension control using ultrashort laser for improving wafer critical dimension uniformity

Dan Avizemer; Ofir Sharoni; Sergey Oshemkov; Avi Cohen; Asaf Dayan; Ranjan Khurana; Dave Kewley

doi:10.1117/1.JMM.14.3.033510

11 September 2015 Critical dimension control using ultrashort laser for improving wafer critical dimension uniformity

Dan Avizemer, Ofir Sharoni, Sergey Oshemkov, Avi Cohen, Asaf Dayan, Ranjan Khurana, Dave Kewley

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 14, Issue 3, 033510 (September 2015). https://doi.org/10.1117/1.JMM.14.3.033510

Abstract

Requirements for control of critical dimension (CD) become more demanding as the integrated circuit (IC) feature size specifications become tighter and tighter. Critical dimension control, also known as CDC, is a well-known laser-based process in the IC industry that has proven to be robust, repeatable, and efficient in adjusting wafer CD uniformity (CDU) [Proc. SPIE6152, 615225 (2006)]. The process involves locally and selectively attenuating the deep ultraviolet light which goes through the photomask to the wafer. The input data for the CDC process in the wafer fab is typically taken from wafer CDU data, which is measured by metrology tools such as wafer-critical dimension—scanning electron microscopy (CD-SEM), wafer optical scatterometry, or wafer level CD (WLCD). The CD correction process uses the CDU data in order to create an attenuation correction contour, which is later applied by the in-situ ultrashort laser system of the CDC to locally change the transmission of the photomask. The ultrashort pulsed laser system creates small, partially scattered, Shade-In-Elements (also known as pixels) by focusing the laser beam inside the quartz bulk of the photomask. This results in the formation of a localized, intravolume, quartz modified area, which has a different refractive index than the quartz bulk itself. The CDC process flow for improving wafer CDU in a wafer fab with detailed explanations of the shading elements formation inside the quartz by the ultrashort pulsed laser is reviewed.

Citation Download Citation

Dan Avizemer, Ofir Sharoni, Sergey Oshemkov, Avi Cohen, Asaf Dayan, Ranjan Khurana, and Dave Kewley "Critical dimension control using ultrashort laser for improving wafer critical dimension uniformity," Journal of Micro/Nanolithography, MEMS, and MOEMS 14(3), 033510 (11 September 2015). https://doi.org/10.1117/1.JMM.14.3.033510

Published: 11 September 2015

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available