19 January 2016 System-on-chip field-programmable gate array design for onboard real-time hyperspectral unmixing
Author Affiliations +
Hyperspectral instruments have been incorporated in satellite missions, providing large amounts of data of high spectral resolution of the Earth surface. This data can be used in remote sensing applications that often require a real-time or near-real-time response. To avoid delays between hyperspectral image acquisition and its interpretation, the last usually done on a ground station, onboard systems have emerged to process data, reducing the volume of information to transfer from the satellite to the ground station. For this purpose, compact reconfigurable hardware modules, such as field-programmable gate arrays (FPGAs), are widely used. This paper proposes an FPGA-based architecture for hyperspectral unmixing. This method based on the vertex component analysis (VCA) and it works without a dimensionality reduction preprocessing step. The architecture has been designed for a low-cost Xilinx Zynq board with a Zynq-7020 system-on-chip FPGA-based on the Artix-7 FPGA programmable logic and tested using real hyperspectral data. Experimental results indicate that the proposed implementation can achieve real-time processing, while maintaining the methods accuracy, which indicate the potential of the proposed platform to implement high-performance, low-cost embedded systems, opening perspectives for onboard hyperspectral image processing.
José M. P. Nascimento, José M. P. Nascimento, Mário Véstias, Mário Véstias, } "System-on-chip field-programmable gate array design for onboard real-time hyperspectral unmixing," Journal of Applied Remote Sensing 10(1), 015004 (19 January 2016). https://doi.org/10.1117/1.JRS.10.015004 . Submission:


A novel VLSI architecture for pixel purity index algorithm
Proceedings of SPIE (September 23 2013)
Three-axis star tracker
Proceedings of SPIE (August 12 1993)
Research on 2D laser distance sensor
Proceedings of SPIE (December 30 2010)

Back to Top