11 February 2017 Detection and location of fouling on photovoltaic panels using a drone-mounted infrared thermography system
Author Affiliations +
Abstract
Due to weathering and external forces, solar panels are subject to fouling and defects after a certain amount of time in service. These fouling and defects have direct adverse consequences such as low-power efficiency. Because solar power plants usually have large-scale photovoltaic (PV) panels, fast detection and location of fouling and defects across large PV areas are imperative. A drone-mounted infrared thermography system was designed and developed, and its ability to detect rapid fouling on large-scale PV panel systems was investigated. The infrared images were preprocessed using the K neighbor mean filter, and the single PV module on each image was recognized and extracted. Combining the local and global detection method, suspicious sites were located precisely. The results showed the flexible drone-mounted infrared thermography system to have a strong ability to detect the presence and determine the position of PV fouling. Drone-mounted infrared thermography also has good technical feasibility and practical value in the detection of PV fouling detection.
© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE)
Peng Zhang, Lifu Zhang, Taixia Wu, Hongming Zhang, Xuejian Sun, "Detection and location of fouling on photovoltaic panels using a drone-mounted infrared thermography system," Journal of Applied Remote Sensing 11(1), 016026 (11 February 2017). https://doi.org/10.1117/1.JRS.11.016026 . Submission: Received: 17 November 2016; Accepted: 24 January 2017
Received: 17 November 2016; Accepted: 24 January 2017; Published: 11 February 2017
JOURNAL ARTICLE
11 PAGES


SHARE
Back to Top