1 July 2005 Design, fabrication, and characterization of a tissue-equivalent phantom for optical elastography
Author Affiliations +
J. of Biomedical Optics, 10(4), 044020 (2005). doi:10.1117/1.2003833
Abstract
We suitably adapt the design of a tissue-equivalent phantom used for photoacoustic imaging to construct phantoms for optical elastography. The elastography phantom we consider should have optical properties such as scattering coefficient, scattering anisotropy factor, and refractive index; mechanical properties such as storage and loss modulus; and acoustic properties such as ultrasound velocity, attenuation coefficient, and acoustic impedance to match healthy and diseased tissues. The phantom is made of poly (vinyl alcohol) (PVA) and its mechanical, optical, and acoustic properties are tailored by physical cross-linking effected through subjecting a suitable mix of PVA stock and water to a number of freeze-thaw cycles and by varying the degree of hydrolysis in the PVA stock. The optical, mechanical, and acoustic properties of the samples prepared are measured by employing different techniques. The measured variations in the values of optical scattering coefficient, scattering anisotropy factor, and refractive index and storage modulus are found to be comparable to those in normal and diseased breast tissues. The acoustic properties such as sound speed, acoustic attenuation coefficient, and density are found to be close to the average values reported in the literature for normal breast tissue.
C. Usha Devi Amma, Ram M. Vasu, A. K. Sood, "Design, fabrication, and characterization of a tissue-equivalent phantom for optical elastography," Journal of Biomedical Optics 10(4), 044020 (1 July 2005). https://doi.org/10.1117/1.2003833
JOURNAL ARTICLE
10 PAGES


SHARE
Back to Top