1 November 2010 Anatomy-driven design of a prototype video laryngoscope for extremely low birth weight infants
Author Affiliations +
Extremely low birth weight (ELBW) infants frequently require endotracheal intubation for assisted ventilation or as a route for administration of drugs or exogenous surfactant. In adults and less premature infants, the risks of this intubation can be greatly reduced using video laryngoscopy, but current products are too large and incorrectly shaped to visualize an ELBW infant's airway anatomy. We design and prototype a video laryngoscope using a miniature camera set in a curved acrylic blade with a 3×6-mm cross section at the tip. The blade provides a mechanical structure for stabilizing the tongue and acts as a light guide for an LED light source, located remotely to avoid excessive local heating at the tip. The prototype is tested on an infant manikin and found to provide sufficient image quality and mechanical properties to facilitate intubation. Finally, we show a design for a neonate laryngoscope incorporating a wafer-level microcamera that further reduces the tip cross section and offers the potential for low cost manufacture.
© (2010) Society of Photo-Optical Instrumentation Engineers (SPIE)
Katherine A. Baker, Katherine A. Baker, Eric J. Tremblay, Eric J. Tremblay, Jason H. Karp, Jason H. Karp, Joseph Ford, Joseph Ford, Neil Finer, Neil Finer, Wade Rich, Wade Rich, } "Anatomy-driven design of a prototype video laryngoscope for extremely low birth weight infants," Journal of Biomedical Optics 15(6), 066023 (1 November 2010). https://doi.org/10.1117/1.3517457 . Submission:


Measurement Of Flight Simulator Visual System Performance
Proceedings of SPIE (August 31 1975)
Modular telerobot control system for accident response
Proceedings of SPIE (August 25 1999)
Visualization in the Neurosurgical OR
Proceedings of SPIE (September 08 1994)
The Modular Charge-Coupled Device (CCD) Camera
Proceedings of SPIE (December 11 1979)

Back to Top