1 February 2013 Application of Cerenkov radiation generated in plastic optical fibers for therapeutic photon beam dosimetry
Author Affiliations +
A Cerenkov fiber-optic dosimeter (CFOD) is fabricated using plastic optical fibers to measure Cerenkov radiation induced by a therapeutic photon beam. We measured the Cerenkov radiation generated in optical fibers in various irradiation conditions to evaluate the usability of Cerenkov radiation for a photon beam therapy dosimetry. As a results, the spectral peak of Cerenkov radiation was measured at a wavelength of 515 nm, and the intensity of Cerenkov radiation increased linearly with increasing irradiated length of the optical fiber. Also, the intensity peak of Cerenkov radiation was measured in the irradiation angle range of 30 to 40 deg. In the results of Monte Carlo N-particle transport code simulations, the relationship between fluxes of electrons over Cerenkov threshold energy and energy deposition of a 6 MV photon beam had a nearly linear trend. Finally, percentage depth doses for the 6 MV photon beam could be obtained using the CFOD and the results were compared with those of an ionization chamber. Here, the mean dose difference was about 0.6%. It is anticipated that the novel and simple CFOD can be effectively used for measuring depth doses in radiotherapy dosimetry.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)
Kyoung Won Jang, Kyoung Won Jang, Takahiro Yagi, Takahiro Yagi, Cheol Ho Pyeon, Cheol Ho Pyeon, Wook Jae Yoo, Wook Jae Yoo, Sang Hun Shin, Sang Hun Shin, Chiyoung Jeong, Chiyoung Jeong, Byung Jun Min, Byung Jun Min, Dongho Shin, Dongho Shin, Tsuyoshi Misawa, Tsuyoshi Misawa, Bongsoo Lee, Bongsoo Lee, } "Application of Cerenkov radiation generated in plastic optical fibers for therapeutic photon beam dosimetry," Journal of Biomedical Optics 18(2), 027001 (1 February 2013). https://doi.org/10.1117/1.JBO.18.2.027001 . Submission:

Back to Top