7 May 2013 Modulation of photoacoustic signal generation from metallic surfaces
Author Affiliations +
Abstract
The ability to image metallic implants is important for medical applications ranging from diagnosis to therapy. Photoacoustic (PA) imaging has been recently pursued as a means to localize metallic implants in soft tissue. The work presented herein investigates different mechanisms to modulate the PA signal generated by macroscopic metallic surfaces. Wires of five different metals are tested to simulate medical implants/tools, while surface roughness is altered or physical vapor deposition (PVD) coatings are added to change the wires’ overall optical absorption. PA imaging data of the wires are acquired at 970 nm. Results indicate that PA signal generation predominately occurs in a wire’s metallic surface and not its aqueous surroundings. PA signal generation is similar for all metals tested, while addition of PVD coatings offers significant modulations (i.e., 4-dB enhancement and 26-dB reduction achieved) in PA signal generation. Results also suggest that PA signal increases with increasing surface roughness. Different coating and roughness schemes are then successfully utilized to generate spatial PA signal patterns. This work demonstrates the potential of surface modifications to enhance or reduce PA signal generation to permit improved PA imaging of implants/tools (i.e., providing location/orientation information) or to allow PA imaging of surrounding tissue.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)
Trevor M. Mitcham, Trevor M. Mitcham, Kimberly A. Homan, Kimberly A. Homan, Wolfgang Frey, Wolfgang Frey, Yun-Sheng Chen, Yun-Sheng Chen, Stanislav Y. Emelianov, Stanislav Y. Emelianov, John D. Hazle, John D. Hazle, Richard Bouchard, Richard Bouchard, } "Modulation of photoacoustic signal generation from metallic surfaces," Journal of Biomedical Optics 18(5), 056008 (7 May 2013). https://doi.org/10.1117/1.JBO.18.5.056008 . Submission:
JOURNAL ARTICLE
9 PAGES


SHARE
Back to Top