3 June 2013 Accuracy of retinal oximetry: a Monte Carlo investigation
Author Affiliations +
Abstract
Retinal hemoglobin oxygen saturation (sO 2 ) level is believed to be associated with the pathophysiology of several leading blinding diseases. Methods to properly measure retinal sO 2 have been investigated for decades; however, the accuracy of retinal oximetry is still considered to be limited. The Monte Carlo simulation of photon transport in retina to examine how the accuracy of retinal oximetry is affected by local parameters is discussed. Fundus photography was simulated in a multilayer retinal model, in which a single vessel segment with 0.7  sO 2 was embedded, at six optical wavelengths. Then, 200 million photons were traced in each simulation to ensure statistically stable results. The optical reflectance and energy deposit were recorded to measure sO 2 using both the reflection method (existing retinal oximetry) and a new absorption method, photoacoustic ophthalmoscopy (PAOM). By varying the vessel diameter and melanin concentration in the retinal pigment epithelium, the relative error of sO 2 measurement in the reflection method increased with increasing vessel diameter and melanin concentration; in comparison, the sO 2 measurement was insensitive to these two parameters in PAOM. The results suggest that PAOM potentially can be a more accurate tool in quantifying retinal sO 2 .
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)
Wenzhong Liu, Wenzhong Liu, Shuliang Jiao, Shuliang Jiao, Hao F. Zhang, Hao F. Zhang, } "Accuracy of retinal oximetry: a Monte Carlo investigation," Journal of Biomedical Optics 18(6), 066003 (3 June 2013). https://doi.org/10.1117/1.JBO.18.6.066003 . Submission:
JOURNAL ARTICLE
11 PAGES


SHARE
RELATED CONTENT


Back to Top