1 July 2016 Three-dimensional printed miniaturized spectral system for collagen fluorescence lifetime measurements
Author Affiliations +
Abstract
Various types of collagens, e.g., type I and III, represent the main load-bearing components in biological tissues. Their composition changes during processes such as wound healing and fibrosis. When excited by ultraviolet light, collagens exhibit autofluorescence distinguishable by their unique fluorescent lifetimes across a range of emission wavelengths. Here, we designed a miniaturized spectral-lifetime detection system as a noninvasive probe for monitoring tissue collagen compositions. A sine-modulated LED illumination was applied to enable frequency domain fluorescence lifetime measurements under three wavelength bands, separated via a series of longpass dichroics at 387, 409, and 435 nm. We employed a lithography-based three-dimensional (3-D) printer with <50  μm resolution to create a custom designed optomechanics in a handheld form factor. We examined the characteristics of the optomechanics with finite element modeling to simulate the effect of thermal (from LED) and mechanical (from handling) strain on the optical system. The geometry was further optimized with ray tracing to form the final 3-D printed structure. Using this device, the phase shift and demodulation of collagen types were measured, where the separate spectral bands enhanced the differentiation of their lifetimes. This system represents a low cost, handheld probe for clinical tissue monitoring applications.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE)
Luwei Zou, Ronald J. Koslakiewicz, Mohamad Mahmoud, Mehdi Fahs, Rui Liu, Joe Fijiou Lo, "Three-dimensional printed miniaturized spectral system for collagen fluorescence lifetime measurements," Journal of Biomedical Optics 21(7), 075001 (1 July 2016). https://doi.org/10.1117/1.JBO.21.7.075001 . Submission:
JOURNAL ARTICLE
10 PAGES


SHARE
Back to Top