2 February 2017 Mechanically switchable polymer fibers for sensing in biological conditions
Author Affiliations +
J. of Biomedical Optics, 22(2), 027001 (2017). doi:10.1117/1.JBO.22.2.027001
The area of in vivo sensing using optical fibers commonly uses materials such as silica and polymethyl methacrylate, both of which possess much higher modulus than human tissue. The mechanical mismatch between materials and living tissue has been seen to cause higher levels of glial encapsulation, scarring, and inflammation, leading to failure of the implanted medical device. We present the use of a fiber made from polyvinyl alcohol (PVA) for use as an implantable sensor as it is an easy to work with functionalized polymer that undergoes a transition from rigid to soft when introduced to water. This ability to switch from stiff to soft reduces the severity of the immune response. The fabricated PVA fibers labeled with fluorescein for sensing applications showed excellent response to various stimuli while exhibiting mechanical switchability. For the dry fibers, a tensile storage modulus of 4700 MPa was measured, which fell sharply to 145 MPa upon wetting. The fibers showed excellent response to changing pH levels, producing values that were detectable in a range consistent with those seen in the literature and in proposed applications. The results show that these mechanically switchable fibers are a viable option for future sensing applications.
© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE)
Sean McMillan, Chris Rader, Mehdi Jorfi, Gary Pickrell, E. Johan Foster, "Mechanically switchable polymer fibers for sensing in biological conditions," Journal of Biomedical Optics 22(2), 027001 (2 February 2017). https://doi.org/10.1117/1.JBO.22.2.027001 Submission: Received 30 September 2016; Accepted 10 January 2017
Submission: Received 30 September 2016; Accepted 10 January 2017

Optical fibers




Mechanical sensors



Back to Top