1 January 2002 On Wiener filtering and the physics behind statistical modeling
Author Affiliations +
The closed-form solution of the so-called statistical multivariate calibration model is given in terms of the pure component spectral signal, the spectral noise, and the signal and noise of the reference method. The ‘‘statistical’’ calibration model is shown to be as much grounded on the physics of the pure component spectra as any of the ‘‘physical’’ models. There are no fundamental differences between the two approaches since both are merely different attempts to realize the same basic idea, viz., the spectrometric Wiener filter. The concept of the application-specific signal-to-noise ratio (SNR) is introduced, which is a combination of the two SNRs from the reference and the spectral data. Both are defined and the central importance of the latter for the assessment and development of spectroscopic instruments and methods is explained. Other statistics like the correlation coefficient, prediction error, slope deficiency, etc., are functions of the SNR. Spurious correlations and other practically important issues are discussed in quantitative terms. Most important, it is shown how to use a priori information about the pure component spectra and the spectral noise in an optimal way, thereby making the distinction between statistical and physical calibrations obsolete and combining the best of both worlds. Companies and research groups can use this article to realize significant savings in cost and time for development efforts.
© (2002) Society of Photo-Optical Instrumentation Engineers (SPIE)
Ralf Marbach, Ralf Marbach, } "On Wiener filtering and the physics behind statistical modeling," Journal of Biomedical Optics 7(1), (1 January 2002). https://doi.org/10.1117/1.1427051 . Submission:

Back to Top