1 January 2004 Theoretical modeling and evaluation of the axial resolution of the adaptive optics scanning laser ophthalmoscope
Author Affiliations +
Abstract
We present axial resolution calculated using a mathematical model of the adaptive optics scanning laser ophthalmoscope (AOSLO). The peak intensity and the width of the axial intensity response are computed with the residual Zernike coefficients after the aberrations are corrected using adaptive optics for eight subjects and compared with the axial resolution of a diffraction-limited eye. The AOSLO currently uses a confocal pinhole that is 80 µm, or 3.48 times the width of the Airy disk radius of the collection optics, and projects to 7.41 µm on the retina. For this pinhole, the axial resolution of a diffraction-limited system is 114 µm and the computed axial resolution varies between 120 and 146 µm for the human subjects included in this study. The results of this analysis indicate that to improve axial resolution, it is best to reduce the pinhole size. The resulting reduction in detected light may demand, however, a more sophisticated adaptive optics system. The study also shows that imaging systems with large pinholes are relatively insensitive to misalignment in the lateral positioning of the confocal pinhole. However, when small pinholes are used to maximize resolution, alignment becomes critical.
© (2004) Society of Photo-Optical Instrumentation Engineers (SPIE)
Krishnakumar Venkateswaran, Krishnakumar Venkateswaran, Austin Roorda, Austin Roorda, Fernando Romero-Borja, Fernando Romero-Borja, } "Theoretical modeling and evaluation of the axial resolution of the adaptive optics scanning laser ophthalmoscope," Journal of Biomedical Optics 9(1), (1 January 2004). https://doi.org/10.1117/1.1627775 . Submission:
JOURNAL ARTICLE
7 PAGES


SHARE
Back to Top