1 October 2004 Novel architecture for the JPEG2000 block coder
Author Affiliations +
JPEG2000 is the newest international standard to be produced by the Joint Photographic Experts Group (JPEG) and it has recently been published as an International Standards Organization/IEC standard and as an ITU-T recommendation. It complements most of the currently used standards including the original JPEG, usually with superior compression for the same image quality, or alternatively with superior image quality for the same bit rate. The algorithm uses the wavelet transform followed by an embedded block coder incorporating the MQ arithmetic coder. In this article we give a novel hardware architecture for the block coder and MQ coder as used in the JPEG2000 standard. Together with appropriate software, this design enables a high performance system-on-chip solution for JPEG2000 image compression. We have included sufficient introductory material to interest readers unfamiliar with either JPEG2000 or hardware design.
© (2004) Society of Photo-Optical Instrumentation Engineers (SPIE)
Darren Freeman, Darren Freeman, Greg Knowles, Greg Knowles, } "Novel architecture for the JPEG2000 block coder," Journal of Electronic Imaging 13(4), (1 October 2004). https://doi.org/10.1117/1.1785802 . Submission:


New region-of-interest image coding method
Proceedings of SPIE (November 13 2007)
Multicomponent compression in JPEG 2000 Part II
Proceedings of SPIE (December 06 2001)
Low-cost wavelet image compression for FPGAs
Proceedings of SPIE (August 31 2009)

Back to Top