24 February 2012 Optimal design and critical analysis of a high-resolution video plenoptic demonstrator
Author Affiliations +
Abstract
A plenoptic camera is a natural multiview acquisition device also capable of measuring distances by correlating a set of images acquired under different parallaxes. Its single lens and single sensor architecture have two downsides: limited resolution and limited depth sensitivity. As a first step and in order to circumvent those shortcomings, we investigated how the basic design parameters of a plenoptic camera optimize both the resolution of each view and its depth-measuring capability. In a second step, we built a prototype based on a very high resolution Red One® movie camera with an external plenoptic adapter and a relay lens. The prototype delivered five video views of 820 × 410. The main limitation in our prototype is view crosstalk due to optical aberrations that reduce the depth accuracy performance. We simulated some limiting optical aberrations and predicted their impact on the performance of the camera. In addition, we developed adjustment protocols based on a simple pattern and analysis of programs that investigated the view mapping and amount of parallax crosstalk on the sensor on a pixel basis. The results of these developments enabled us to adjust the lenslet array with a submicrometer precision and to mark the pixels of the sensor where the views do not register properly.
© 2012 SPIE and IS&T
Valter Drazic, Valter Drazic, Jean-Jacques Sacré, Jean-Jacques Sacré, Arno Schubert, Arno Schubert, Jérôme Bertrand, Jérôme Bertrand, Etienne Blonde, Etienne Blonde, } "Optimal design and critical analysis of a high-resolution video plenoptic demonstrator," Journal of Electronic Imaging 21(1), 011007 (24 February 2012). https://doi.org/10.1117/1.JEI.21.1.011007 . Submission:
JOURNAL ARTICLE
11 PAGES


SHARE
Back to Top