11 June 2013 Video retargeting based on group of frames
Author Affiliations +
Temporal coherence of retargeted video is important. Even a mild temporal inconsistency among subsequent frames can result in visually annoying artifacts, such as jittering or flickering. To reduce these artifacts, we assign a common seam for a group of consecutive frames (GoF). The video sequence is divided into GoFs, and a representative frame for each GoF is formed. Then, both the spatial saliency in each representative frame and the temporal coherence among the consecutive representative frames are considered to determine a common seam for each GoF. Since a fixed seam of the representative frame is applied to the whole frames in a GoF, there will be no jittering and flickering artifacts within the GoF. Also, since the temporal coherence between the two consecutive representative frames (i.e., two consecutive GoFs) was taken into account, the transition between two consecutive GoFs will be smooth.
© 2013 SPIE and IS&T
Hai Thanh Nguyen, Hai Thanh Nguyen, Chee Sun Won, Chee Sun Won, } "Video retargeting based on group of frames," Journal of Electronic Imaging 22(2), 023023 (11 June 2013). https://doi.org/10.1117/1.JEI.22.2.023023 . Submission:


Panorama system
Proceedings of SPIE (July 05 1998)
Real-time panoramic of multiple sensors
Proceedings of SPIE (April 14 2008)
Immersive video for virtual tourism
Proceedings of SPIE (November 11 2001)

Back to Top