22 December 2015 Calibration and disparity maps for a depth camera based on a four-lens device
Author Affiliations +
J. of Electronic Imaging, 24(6), 061108 (2015). doi:10.1117/1.JEI.24.6.061108
We propose a model of depth camera based on a four-lens device. This device is used for validating alternate approaches for calibrating multiview cameras and also for computing disparity or depth images. The calibration method arises from previous works, where principles of variable homography were extended for three-dimensional (3-D) measurement. Here, calibration is performed between two contiguous views obtained on the same image sensor. This approach leads us to propose a new approach for simplifying calibration by using the properties of the variable homography. Here, the second part addresses new principles for obtaining disparity images without any matching. A fast algorithm using a contour propagation algorithm is proposed without requiring structured or random pattern projection. These principles are proposed in a framework of quality control by vision, for inspection in natural illumination. By preserving scene photometry, some other standard controls, as for example calipers, shape recognition, or barcode reading, can be done conjointly with 3-D measurements. Approaches presented here are evaluated. First, we show that rapid calibration is relevant for devices mounted with multiple lenses. Second, synthetic and real experimentations validate our method for computing depth images.
© 2015 SPIE and IS&T
Cécile Riou, Bruno Colicchio, Jean-Philippe Lauffenburger, Olivier Haeberlé, Christophe Cudel, "Calibration and disparity maps for a depth camera based on a four-lens device," Journal of Electronic Imaging 24(6), 061108 (22 December 2015). https://doi.org/10.1117/1.JEI.24.6.061108



Image fusion

3D metrology




Back to Top