11 January 2016 Coarse-to-fine three-dimensional digitization system
Author Affiliations +
J. of Electronic Imaging, 24(6), 061120 (2016). doi:10.1117/1.JEI.24.6.061120
The three-dimensional (3-D) workflow (acquisition-processing-compression) is, in most cases, sequenced into several independent steps. Such approaches result in an acquisition of an important number of 3-D points. After acquisition, the first processing step is a simplification of the data by suppressing many of the computed points. We propose a coarse-to-fine acquisition system that makes it possible to obtain simplified data directly from the acquisition. By calculating some complementary information from two-dimensional (2-D) images, such as 3-D normals, multiple-homogeneous regions will be segmented and affected for a given primitive class. In contrast to other studies, the whole process is not based on a mesh. The obtained model is simplified directly from the 2-D data acquired by a 3-D scanner.
© 2015 SPIE and IS&T
Vincent Daval, Frederic Truchetet, Olivier Aubreton, "Coarse-to-fine three-dimensional digitization system," Journal of Electronic Imaging 24(6), 061120 (11 January 2016). https://doi.org/10.1117/1.JEI.24.6.061120

3D modeling

3D acquisition

Image segmentation

3D image processing

3D scanning


Data acquisition

Back to Top