15 October 2016 Hyperspectral imaging as a technique for investigating the effect of consolidating materials on wood
Author Affiliations +
The focus of this study was to investigate the potential of hyperspectral imaging (HSI) in the monitoring of commercial consolidant products applied on wood samples. Poplar and walnut were chosen for the consolidant application. Both traditional and innovative products were selected, based on acrylic, epoxy, and aliphatic compounds. Wood samples were stressed by freeze/thaw cycles in order to cause material degradation without the loss of wood components. Then the consolidant was applied under vacuum. The samples were finally artificially aged for 168 h in a solar box chamber. The samples were acquired in the short wave infrared (1000 to 2500 nm) range by SISUChema XL™ device (Specim, Finland) after 168 h of irradiation. As comparison, color measurement was also used as an economic, simple, and noninvasive technique to evaluate the deterioration and consolidation effects on wood. All data were then processed adopting a chemometric approach finalized to define correlation models, HSI based, between consolidating materials, wood species, and short-time aging effects.
© 2016 SPIE and IS&T
Giuseppe Bonifazi, Giuseppe Bonifazi, Silvia Serranti, Silvia Serranti, Giuseppe Capobianco, Giuseppe Capobianco, Giorgia Agresti, Giorgia Agresti, Luca Calienno, Luca Calienno, Rodolfo Picchio, Rodolfo Picchio, Angela Lo Monaco, Angela Lo Monaco, Ulderico Santamaria, Ulderico Santamaria, Claudia Pelosi, Claudia Pelosi, } "Hyperspectral imaging as a technique for investigating the effect of consolidating materials on wood," Journal of Electronic Imaging 26(1), 011003 (15 October 2016). https://doi.org/10.1117/1.JEI.26.1.011003 . Submission:

Back to Top