1 July 1994 Applications of color mixing models to electronic printing
Author Affiliations +
Abstract
The purpose of this study is to obtain some quantitative measures for the applicability of several color mixing models to a halftone printer. The printer, a Canon Color Laser Copier 500 (CLC-500), is treated as a black box and the measures are the difference between the calculated and measured spectra and ΔEab. Well-known color mixing theories of the Neugebauer equations, Yule-Nielsen model (YN), Clapper-Yule multiple internal reflections (CY), Beer-Bouguerlaw (BB), and Kubelka-Munk theories (KM) are applied to CLC-500 to see how well they can fit the experimental data. Results indicate that the spectral 8-color Neugebauer model has marginal success in fitting the experimental data and the relaxed 3-color version does not fit the data weli. Both YN and CY approaches can fit the data within printer variability. The fittings are rather poor for BB and KM. By using the halftone correction factor, good agreements are obtained for the BB and single-constant KM.
Henry R. Kang, Henry R. Kang, } "Applications of color mixing models to electronic printing," Journal of Electronic Imaging 3(3), (1 July 1994). https://doi.org/10.1117/12.176273 . Submission:
JOURNAL ARTICLE
12 PAGES


SHARE
RELATED CONTENT

Gray component replacement using color mixing models
Proceedings of SPIE (May 08 1994)
Printer model for dot-on-dot halftone screens
Proceedings of SPIE (April 26 1995)
A general BRDF/BSDF model including out-of-plane dependence
Proceedings of SPIE (September 09 2010)
Simplified ink spreading equations for CMYK halftone prints
Proceedings of SPIE (January 27 2008)
The study on physical dot gain of second order FM...
Proceedings of SPIE (January 24 2012)
Reflectance model for color halftone prints
Proceedings of SPIE (January 27 2008)

Back to Top