1 October 1995 Colorimetric characterization of a desktop drum scanner using a spectral model
Author Affiliations +
A desktop drum scanner was colorimetrically characterized to an average CIELAB error of less than unity for Kodak Ektachrome transparencies and Ektacolor paper, and Fuji Photo Film Fujichrome transparencies and Fujicolor paper. Independent verification on spectrally similar materials yielded an average ΔE*ab error of less than 2.1. The image formation of each medium was first modeled using either Beer-Bouguer or Kubelka-Munk theories and eigenvector analysis. Scanner digital values were then empirically related to dye concentrations using polynomial step-wise multiple-linear regression. These empirical matrices were required because the scanner's system spectral responsivities had excessively wide bandwidths. From these estimated dye concentrations, either a spectral transmittance or spectral reflectance factor was calculated from an a priori spectral analysis of each medium. The spectral estimates can be used to calculate tristimulus values for any illuminant and obsetver of interest. The methods used in this research are based on historical methods commonly used in photographic science.
Roy S. Berns, Roy S. Berns, M. J. Shyu, M. J. Shyu, } "Colorimetric characterization of a desktop drum scanner using a spectral model," Journal of Electronic Imaging 4(4), (1 October 1995). https://doi.org/10.1117/12.218935 . Submission:

Back to Top