Open Access
25 October 2016 Errata: Spectral response model for a multibin photon-counting spectral computed tomography detector and its applications
Xuejin Liu, Mats Persson, Hans Bornefalk, Staffan Karlsson, Cheng Xu, Mats Danielsson, Ben Huber
Author Affiliations +

This article [J. Med. Imag. 2(3), 033502 (2015)] was originally published online on 11 September 2015 with an error on p. 3. At the bottom of the left column, the formula σ=135  keV has been replaced by σ=1.35  keV.

On p. 8, Fig. 8 is wrong due to the miscalculated Hounsfield unit for these bin images. The correct figure is reproduced below.

Fig. 8

Reconstructed bin images of energy bin 1, bin 5, and bin 8. (a) are the bin images reconstructed from the raw projection data that are normalized by flat fielding using an air scan. (b) are the bin images reconstructed from the projection data that are processed with the inhomogeneity compensation method. All images are normalized to HU measured in the water insert.

JMI_3_4_049801_f001.png

This article was corrected online on 14 October 2016.

© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE)
Xuejin Liu, Mats Persson, Hans Bornefalk, Staffan Karlsson, Cheng Xu, Mats Danielsson, and Ben Huber "Errata: Spectral response model for a multibin photon-counting spectral computed tomography detector and its applications," Journal of Medical Imaging 3(4), 049801 (25 October 2016). https://doi.org/10.1117/1.JMI.3.4.049801
Published: 25 October 2016
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Computed tomography

Optical computing

Sensors

Spectral models

Data processing

Image processing

Medical imaging

Back to Top