2 April 2018 Toward dynamic lumbar puncture guidance using needle-based single-element ultrasound imaging
Author Affiliations +
Abstract
Lumbar punctures (LPs) are interventional procedures that are used to collect cerebrospinal fluid. Since the target window is small, physicians have limited success conducting the procedure. The procedure is especially difficult for obese patients due to the increased distance between bone and skin surface. We propose a simple and direct needle insertion platform, enabling image formation by sweeping a needle with a single ultrasound element at the tip. The needle-shaped ultrasound transducer can not only sense the distance between the tip and a potential obstacle, such as bone, but also visually locate the structures by combining transducer location tracking and synthetic aperture focusing. The concept of the system was validated through a simulation that revealed robust image reconstruction under expected errors in tip localization. The initial prototype was built into a 14 G needle and was mounted on a holster equipped with a rotation shaft allowing one degree-of-freedom rotational sweeping and a rotation tracking encoder. We experimentally evaluated the system using a metal-wire phantom mimicking high reflection bone structures and human spinal bone phantom. Images of the phantoms were reconstructed, and the synthetic aperture reconstruction improved the image quality. These results demonstrate the potential of the system to be used as a real-time guidance tool for improving LPs.
© 2018 Society of Photo-Optical Instrumentation Engineers (SPIE)
Haichong K. Zhang, Haichong K. Zhang, Younsu Kim, Younsu Kim, Melissa Lin, Melissa Lin, Mateo Paredes, Mateo Paredes, Karun Kannan, Karun Kannan, Abhay Moghekar, Abhay Moghekar, Nicholas J. Durr, Nicholas J. Durr, Emad M. Boctor, Emad M. Boctor, } "Toward dynamic lumbar puncture guidance using needle-based single-element ultrasound imaging," Journal of Medical Imaging 5(2), 021224 (2 April 2018). https://doi.org/10.1117/1.JMI.5.2.021224 . Submission: Received: 20 August 2017; Accepted: 5 March 2018
Received: 20 August 2017; Accepted: 5 March 2018; Published: 2 April 2018
JOURNAL ARTICLE
10 PAGES


SHARE
Back to Top