1 January 2011 Effective exposure dose monitoring technique in extreme ultraviolet lithography
Author Affiliations +
J. of Micro/Nanolithography, MEMS, and MOEMS, 10(1), 013005 (2011). doi:10.1117/1.3533231
Extreme ultraviolet (EUV) lithography is a promising candidate for 2x-nm-node device manufacturing. Management of effective dose is important to meet the stringent requirements for critical dimension control. As a test pattern for a lithography tool evaluation, the effective dose monitor (EDM) demonstrates sound performance in dose monitoring for optical lithography, such as KrF lithography. The EDM can measure an exposure dose with no influence on defocus, because the image of an EDM pattern is produced by the zeroth-order ray in diffraction only. When this technique is applied to EUV lithography, the mask shadowing effect should be taken into consideration. We calculated the shadowing effect as a function of field position and applied it to correction of the experimental dose variation. We estimated the dose variation in EUV exposure field to be 2.55% when corrected by the shadowing effect. We showed that the EDM is useful for EUV lithography.
Yumi Nakajima, Kentaro Kasa, Takashi Sato, Masafumi Asano, Suigen Kyoh, Hiroyuki Mizuno, "Effective exposure dose monitoring technique in extreme ultraviolet lithography," Journal of Micro/Nanolithography, MEMS, and MOEMS 10(1), 013005 (1 January 2011). https://doi.org/10.1117/1.3533231

Extreme ultraviolet lithography



Extreme ultraviolet


Semiconducting wafers

Critical dimension metrology


Extension of practical k1 limit in EUV lithography
Proceedings of SPIE (March 18 2016)
Mask-induced aberration in EUV lithography
Proceedings of SPIE (May 11 2009)

Back to Top