12 March 2012 Pyrex/Si-bonded microvalve performance for precision applications in micropropulsion systems
Author Affiliations +
Reduction in power consumption while maintaining trajectory alignment and ensuring precise attitude control in microsatellites has been a global bottleneck in the coupled fields of inertial navigation and micropropulsion systems research. This paper presents the development of a novel microelectromechanical Pyrex/Si binary valve with piezoelectric stack-actuation for applications in microsatellite propulsion systems. The Pyrex 7740 and silicon wafers have been processed in parallel with two different structures being microfabricated and bonded eutectically to realize the microvalve. Electrochemical spark erosion method has been used to realize the inlet/outlet holes in Pyrex 7740 and KOH bulk micromachining to fabricate the top membrane structure in silicon. The device has been subjected to extensive analyses and characterization and has been shown to comply with the requirements of generic ion thrusters used for microsatellite propulsion.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE)
Bidhan Pramanick, Bidhan Pramanick, Soumen Das, Soumen Das, Tarun K. Bhattacharyya, Tarun K. Bhattacharyya, } "Pyrex/Si-bonded microvalve performance for precision applications in micropropulsion systems," Journal of Micro/Nanolithography, MEMS, and MOEMS 11(1), 013008 (12 March 2012). https://doi.org/10.1117/1.JMM.11.1.013008 . Submission:


Three-dimensional bonding technologies for MEMS
Proceedings of SPIE (April 23 2003)
Vacuum wafer-level packaging for MEMS applications
Proceedings of SPIE (January 14 2003)
Large scale nanolaminate deformable mirror
Proceedings of SPIE (January 22 2006)
Characterization of glass on electronics in MEMS
Proceedings of SPIE (September 02 1999)
Wafer capping of MEMS with fab-friendly metals
Proceedings of SPIE (January 18 2007)

Back to Top