15 June 2012 Brilliance scaling of discharge sources for extreme-ultraviolet and soft x-ray radiation for metrology applications
Author Affiliations +
Abstract
Discharge based extreme-ultraviolet (EUV) sources have experienced significant progress in the last decade at different places. They are commercially available and are presently being used in scanners for EUV lithography and related development projects in the semiconductor industry. The technology has been proven to be scalable from a wavelength of 13.5 nm down to the water window spectral range (2.4 to 4.4 nm), which envisions a new generation of compact systems using soft x-rays and extreme ultraviolet (XUV) light for metrology, patterning, or microscopy. Especially for microscopy applications such as aerial imaging microscopy of EUV masks, a high brilliance is required. First results on the achievable brilliance of a gas discharge source in the XUV and soft x-ray range are presented. Currently, a brilliance of 12.9  W/(mm2 sr 2% b.w.) at a central wavelength of 13.5 nm and 100  W/(mm2 sr 4% b.w.) at 10.9 nm are achieved. For the 2.88-nm single emission line of nitrogen, the source produces 0.28  W/(mm2 sr) or 4*109  photons/(μm2 sr s) at a spectral bandwidth of λ/Δλ = 840. Based on existing data, the potential of brilliance scaling is discussed.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE)
Markus Benk, Markus Benk, Klaus Bergmann, Klaus Bergmann, } "Brilliance scaling of discharge sources for extreme-ultraviolet and soft x-ray radiation for metrology applications," Journal of Micro/Nanolithography, MEMS, and MOEMS 11(2), 021106 (15 June 2012). https://doi.org/10.1117/1.JMM.11.2.021106 . Submission:
JOURNAL ARTICLE
8 PAGES


SHARE
Back to Top