7 May 2012 Packaging of MEMS and MOEMS for harsh environments
Author Affiliations +
J. of Micro/Nanolithography, MEMS, and MOEMS, 11(2), 021202 (2012). doi:10.1117/1.JMM.11.2.021202
A method for die-attach based on sintering of micro- and nano-silver-particles, which is stable in harsh environments, was described. A modified flip-chip bonder providing high placement accuracy was used for precise pick and place die-attach. Components of sensors designed for data logging during deep drilling, i.e., a MEMS vibration sensor and a MOEMS pressure sensor, were assembled and tested at temperatures up to 250°C. Shear tests of bonded devices were performed before and after temperature load. Bonded silicon-on-insulator Wheatstone bridges and GaP-PD were tested by temperature cycling (50 cycles from 100°C up to 250°C).
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE)
Julian Kähler, Andrej Stranz, Andreas Waag, Erwin Peiner, "Packaging of MEMS and MOEMS for harsh environments," Journal of Micro/Nanolithography, MEMS, and MOEMS 11(2), 021202 (7 May 2012). https://doi.org/10.1117/1.JMM.11.2.021202

Back to Top