14 August 2012 Low cost fabrication and testing of high isolation radio frequency MEMS switches
Abhay B. Joshi, Shashikala Gangal, R. Gandhi, K. Natarajan, Dhananjay Bodas
Author Affiliations +
Abstract
Radio frequency MEMS switches are key components in low power communication systems. The present paper reports fabrication of MEMS based series and shunt switches for actuation voltage in the range of 30 to 50 V. Focusing on a low cost fabrication approach, the switches were designed for higher isolation of >25  dB and low insertion loss of <0.5  dB. Aluminum was chosen as a cost effective alternative for the fabrication of the transmission line and structural beam. The shunt and series switches were investigated for a frequency range of 1 to 20 GHz. The shunt switch shows the insertion loss of 0.5 dB and isolation of −28  dB and the series switch shows the insertion loss of 0.7 dB and isolation of −27  dB at 20 GHz. The measured actuation voltage was 30 V for the shunt switch and 42 V for the series switch.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2012/$25.00 © 2012 SPIE
Abhay B. Joshi, Shashikala Gangal, R. Gandhi, K. Natarajan, and Dhananjay Bodas "Low cost fabrication and testing of high isolation radio frequency MEMS switches," Journal of Micro/Nanolithography, MEMS, and MOEMS 11(3), 033001 (14 August 2012). https://doi.org/10.1117/1.JMM.11.3.033001
Published: 14 August 2012
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Switches

Microelectromechanical systems

Aluminum

Resistance

Capacitance

Signal attenuation

Inductance

RELATED CONTENT

High-isolation contact switch in MEMS phase shifter
Proceedings of SPIE (December 08 2004)
Study on DC-contact MEMS switches
Proceedings of SPIE (December 08 2004)
A novel multi-actuation CMOS RF MEMS switch
Proceedings of SPIE (December 30 2008)

Back to Top