16 July 2012 Spectral imaging characterization of quartz MOEM tunable Fabry-Perot filter
Author Affiliations +
Recently, prototype MOEM tunable Fabry-Perot filters operating from 400 to 800 nm were fabricated under a program to design miniature hyperspectral imagers operating from the visible to the longwave infrared. The filter design uses two semitransparent 30 nm thick silver-film mirrors, one fixed and the other moving, on a low-cost thin commercial quartz substrate. The moving mirror is supported by three leaf spring arms, which are fabricated by wet etching of the quartz substrate. The tuning of the transmitted wavelength of light from the filter is achieved by electrostatically actuating the moving mirror to vary the distance between the two mirrors. The size of the device is 18×24  mm2. The fixed part has a 6 mm diameter mirror and three electrodes to apply voltages, and the moving mirror is used as a ground electrode. Au bumps deposited on both parts control the initial air gap distance, and an Au-Au bonding is used to bond the two parts together. The spectral imaging performance of the MOEM filter is characterized using a spectrally tunable source and a CCD camera with suitable optics. The authors present a brief description of the filter, its characteristics, spectral imaging characterization experiment and results.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE)
Neelam Gupta, Songsheng Tan, "Spectral imaging characterization of quartz MOEM tunable Fabry-Perot filter," Journal of Micro/Nanolithography, MEMS, and MOEMS 11(3), 033002 (16 July 2012). https://doi.org/10.1117/1.JMM.11.3.033002 . Submission:

Back to Top