10 June 2013 MOEMS tunable microlens made of aluminum nitride membranes
Author Affiliations +
Abstract
We present tunable lenses based on aluminum nitride membranes. The achievable tuning range in the refractive power is 0 to 25 dpt with an external pressure load of ≤20  kPa . The lenses are manufactured using MOEMS technology. For 500-nm-thick membranes with a diameter of 3 mm, a spherical deflection profile is found. The system provides good long-term stability showing no creep or hysteresis. A model for the refractive power versus applied pressure is derived and validated experimentally. Based on this model, design guidelines are discussed. One essential parameter is the residual stress of the aluminum nitride layer that can be controlled during deposition.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)
Steffen Leopold, Steffen Leopold, Tobias Polster, Tobias Polster, Daniel Paetz, Daniel Paetz, Fabian Knoebber, Fabian Knoebber, Oliver Ambacher, Oliver Ambacher, Stefan Sinzinger, Stefan Sinzinger, Martin Hoffmann, Martin Hoffmann, "MOEMS tunable microlens made of aluminum nitride membranes," Journal of Micro/Nanolithography, MEMS, and MOEMS 12(2), 023012 (10 June 2013). https://doi.org/10.1117/1.JMM.12.2.023012 . Submission:
JOURNAL ARTICLE
9 PAGES


SHARE
RELATED CONTENT


Back to Top