17 December 2014 Layout pattern-driven design rule evaluation
Author Affiliations +
Abstract
With the use of subwavelength photolithography, some layouts can have low printability and, accordingly, low yield due to the existence of bad patterns even though they pass design rule checks. A reasonable approach is to select some of the candidate bad patterns as forbidden. These are the ones with a high yield impact or low routability impact, and these are to be prohibited in the design phase. The rest of the candidate bad patterns may be fixed in the postroute stage in a best-effort manner. The process developers need to optimize the process to be friendly to the patterns of high routability impact. Hence, an evaluation method is required early in the process to assess the impact of forbidding layout patterns on routability. We propose pattern-driven design rule evaluation (pattern-DRE), which can be used to evaluate the importance of patterns for the routability of the standard cells and, accordingly, select the set of bad patterns to forbid in the design. The framework can also be used to compare restrictive patterning technologies [e.g., litho-etch-litho-etch (LELE), self-aligned double patterning (SADP), self-aligned quadruple patterning (SAQP), self-aligned octuple patterning (SAOP)]. Given a set of design rules and a set of forbidden patterns, pattern-DRE generates a set of virtual standard cells; then it finds the possible routing options for each cell without using any of the forbidden patterns. Finally, it reports the routability metrics. We present a few studies that illustrate the use cases of the framework. The first study compares LELE to SADP by using a set of forbidden patterns that are allowed by LELE but not by SADP. Another study compares LELE to extreme ultraviolet lithography from the routability aspect by prohibiting patterns that have LELE native conflicts. In addition, we present a study that investigates the effect of placing the active area of the transistors close to the P/N interface instead of close to the power rails.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)
Yasmine A. Badr, Yasmine A. Badr, Ko-wei Ma, Ko-wei Ma, Puneet Gupta, Puneet Gupta, } "Layout pattern-driven design rule evaluation," Journal of Micro/Nanolithography, MEMS, and MOEMS 13(4), 043018 (17 December 2014). https://doi.org/10.1117/1.JMM.13.4.043018 . Submission:
JOURNAL ARTICLE
8 PAGES


SHARE
Back to Top