13 May 2015 Application of E-beam hot spot inspection for early detection of systematic patterning problems to a FinFET technology
Author Affiliations +
Early in-line detection of systematic patterning problems in technology development can dramatically improve a technology’s chance for success. By uncovering layout geometries that are difficult to implement, prompt action may be taken so that solutions are in place well before product chips that contain these and similar patterns enter the manufacturing line. If a solution is not in place, this could spell disaster for the product and perhaps even the technology. Ideally, product chips will work on the first lot, which is referred to as “first time right.” To help ensure this, a methodology for in-line detection of systematic patterning problems using E-beam hot spot inspection (EBHI) was developed. We review this methodology, including the latest enhancements. Pattern simulation tools and other sources are used to provide die locations with challenging geometries for evaluation. EBHI evaluates the patterning capability for these locations using modulated wafers. A multifunction team addresses any hot spots that fail within the process window. EBHI is then used to evaluate the solutions proposed by this team. Application of this methodology to a fin-shaped field effect transistor technology is described using examples from the fin and back end of line modules. These examples illustrate the full range of actions used to resolve patterning issues.
© 2015 Society of Photo-Optical Instrumentation Engineers (SPIE)
Deborah A. Ryan, Deborah A. Ryan, Oliver D. Patterson, Oliver D. Patterson, Shuen-Cheng Lei, Shuen-Cheng Lei, David Conklin, David Conklin, Jim Liang, Jim Liang, Glenn Biery, Glenn Biery, Atsushi Ogino, Atsushi Ogino, Bachir Dirahoui, Bachir Dirahoui, Zachary Baum, Zachary Baum, Michael D. Monkowski, Michael D. Monkowski, } "Application of E-beam hot spot inspection for early detection of systematic patterning problems to a FinFET technology," Journal of Micro/Nanolithography, MEMS, and MOEMS 14(2), 021106 (13 May 2015). https://doi.org/10.1117/1.JMM.14.2.021106 . Submission:

Back to Top