8 September 2016 Realization of large-scale photonic crystal cavity-based devices
Author Affiliations +
Abstract
This paper demonstrates an approach for fabricating large-scale photonic crystal (PhC)-based devices using a combination of optical and focused ion beam (FIB) lithography techniques. Optical lithography along with reactive ion etching parameters is optimized to realize the layout of device structure and thereafter FIB milling is optimized to realize the designed PhC structure at those identified locations. At first, with the help of a specially designed mask and using optical lithography along with reactive ion etching, a number of rectangular areas of dimension of 10  μm×20  μm along with input and output waveguides of width ∼700  nm and thickness of ∼250  nm have been fabricated. Subsequently, use of FIB milling, a periodic PhC structure of lattice constant of 600 nm, having a hole diameter of ∼480  nm along with a defect hole diameter of ∼250  nm have been realized successfully on the selected areas. This method shows a promising application in fabricating PhC structure with device size <1  cm2 at large scale, eliminating the problems of standard nanolithography techniques.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE)
Amit Kumar Goyal, Amit Kumar Goyal, Hemant Sankar Dutta, Hemant Sankar Dutta, Sumitra Singh, Sumitra Singh, Mandeep Kaur, Mandeep Kaur, Sudhir Husale, Sudhir Husale, Suchandan Pal, Suchandan Pal, } "Realization of large-scale photonic crystal cavity-based devices," Journal of Micro/Nanolithography, MEMS, and MOEMS 15(3), 031608 (8 September 2016). https://doi.org/10.1117/1.JMM.15.3.031608 . Submission:
JOURNAL ARTICLE
5 PAGES


SHARE
Back to Top