Precise measurement of thin-film thickness in 3D-NAND device with CD-SEM

Takeyoshi Ohashi; Atsuko Yamaguchi; Kazuhisa Hasumi; Masami Ikota; Gian Lorusso; Chi Lim Tan; Geert Van den bosch; Arnaud Furnémont

doi:10.1117/1.JMM.17.2.024002

15 June 2018 Precise measurement of thin-film thickness in 3D-NAND device with CD-SEM

Takeyoshi Ohashi, Atsuko Yamaguchi, Kazuhisa Hasumi, Masami Ikota, Gian Lorusso, Chi Lim Tan, Geert Van den bosch, Arnaud Furnémont

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 17, Issue 2, 024002 (June 2018). https://doi.org/10.1117/1.JMM.17.2.024002

Abstract

A method for the inline measurement of the tunnel oxide–nitride-blocking oxide (ONO) film thickness in 3D-NAND devices was studied. The ONO film, whose thickness is critical to the device properties, cannot be measured with conventional methods because it is deposited on the sidewall of a memory hole. Thus, a method to measure the thickness of this vertical film is required. We propose a critical dimension-scanning electron microscope (CD-SEM) measurement. The film thickness can be obtained by measuring the hole diameter before and after the film deposition. Namely, the decrease in the hole diameter should be twice of the thickness in principle. However, its applicability to the actual 10-nm-thick ONO film has not been verified. In this study, the measurement precision and the validity of the method were examined with actual ONO film in the 3D-NAND test wafers. The results showed excellent precision (0.08 nm) and good consistency with planar transmission electron microscope (TEM) and ellipsometry results. In addition, the method revealed the subnanometer thickness difference depending on the nominal hole diameter and the hole density. It suggests the impact of inhomogeneity in the source gas supply during the film deposition. These results ensure that the method is sufficiently precise for the inline local thickness measurement of the ONO film. With this method, yield and reliability managements in the 3D-NAND device manufacturing would be improved.

Citation Download Citation

Takeyoshi Ohashi, Atsuko Yamaguchi, Kazuhisa Hasumi, Masami Ikota, Gian Lorusso, Chi Lim Tan, Geert Van den bosch, and Arnaud Furnémont "Precise measurement of thin-film thickness in 3D-NAND device with CD-SEM," Journal of Micro/Nanolithography, MEMS, and MOEMS 17(2), 024002 (15 June 2018). https://doi.org/10.1117/1.JMM.17.2.024002

Received: 12 November 2017; Accepted: 31 May 2018; Published: 15 June 2018

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available