14 May 2018 High-efficiency passive micromixer using three-dimensional printed molds
Author Affiliations +
Abstract
The micromixer is a very common component in the state-of-the-art lab-on-chip devices and occupies large chip areas to fulfill the rather challenging process of mixing in microscales. Two various design micromixers are introduced, which show a step over efficiency in the microlevel mixing. Finite-element method (FEM) tools were utilized to assess the mixing efficiency of the presented micromixers versus common T- and zigzag-shaped mixers. Using the availability of three-dimensional printing features, the chaotic advection is maximized as a mainstream factor affecting microscale behavior of the mixer. Both FEM and experimental results prove a 95% improvement in the performance of micromixers for low Reynolds numbers at 1 versus 8 cm for conventional devices.
© 2018 Society of Photo-Optical Instrumentation Engineers (SPIE)
Shayan Valijam, Hadi Veladi, Hamed Baghban, Siavash Zargari, "High-efficiency passive micromixer using three-dimensional printed molds," Journal of Micro/Nanolithography, MEMS, and MOEMS 17(2), 025002 (14 May 2018). https://doi.org/10.1117/1.JMM.17.2.025002 Submission: Received 14 November 2017; Accepted 17 April 2018
Submission: Received 14 November 2017; Accepted 17 April 2018
JOURNAL ARTICLE
6 PAGES


SHARE
Back to Top